| DESCRIPTION |
QP2033 |
QP2040 |
| Table |
Table |
1000x 500mm (39.4"x 19.7") |
1200x 500mm (47.2"x 19.7") |
| T-slots (no x wid x dis) |
5x 18x 100mm
(5"x 0.709"x 3.937") |
5x 18x 100mm
(8"x 0.709"x 3.937") |
| Table Load |
500kg (1100lbs) |
600kg (1320lbs) |
| Travel |
X Travel |
850mm (33.5") |
1020mm (40.2") |
| Y Travel |
510mm (21.7") |
| Z Travel |
510mm (21.7") |
| Spindle |
Spindle Nose to Table |
150~660mm (5.9"~26") |
| Spindle Center to column |
550mm (21.7") |
| Spindle Taper |
7/24 (#40) |
| Spindle Speed |
Belt Drive :8000rpm:10000rpm/12000rpm (Opt.)
Direct Drive : 12000rpm/15000rpm (Opt.) |
| Feed Rates |
Rapid on (X/Y/Z) Axes |
24/ 24/ 20m/min (945/ 945/ 787ipm) |
| Cutting Feedrate |
1~10000mm/min (0.04~394ipm) |
| Accuracy |
Positioning |
VDI 3441 P ±0.006mm |
| Repeatability |
VDI 3441 PS ±0.007mm |
| Tool Changer |
Tool Changer |
24 Arm type
32 Chain type/20 Carousal type (Opt.) |
| Tool Shank |
BT40, CT40 or DIN40 |
| Pull Stud |
JMBTA standard 45° |
| Max. Tool Diameter |
4" (100mm),
opt.24 station cam-arm type 76mm (3") |
| Max. Tool Weight |
7kg (15lbs) |
| Motors |
Spindle Servo Motor |
15HP (15min) |
| Feeding SystemMotors X,Y,Z |
1.8/1.8/2.5kw (2.4/2.4/3.4HP) |
| Coolant Pump |
1/2HP (0.38kW) |
| General |
Power Required |
20kVA |
| Air Required |
80 PSI (5kg/cm2 ), 200L/min |
| Machine Size (LxWxH) |
2770x 2425x 2532mm (109"x 95.5"x 100") |
| Machine weight (Approx.) |
5550kg (12210lbs) |
5800kg (12760lbs) |
| Note: The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without notice, all the specifications shown above are just for reference |
Grinding Machine Series
