| MODEL |
Unit |
FVM-130200DC |
FVM-130240DC |
| Table |
Table Size |
mm(") |
5200x 2200)
(204.7x 86.6)
Opt.5200x 2600
(204.7x 102.3) |
6200x 2200)
(244x 86.6)
Opt.6200x 2600
(244x 102.3) |
| Table Loading |
kg |
18000 (39600) |
20000 (44000) |
| Work piece |
mm(") |
4900x 3200x 1000 |
5900x 3200x 1000 |
| T Slots |
W×P.C×Pitch |
mm(") |
28x 11x 200(1.1x0.43x7.9) |
| Travel |
X Axis |
mm(") |
5000 (197) |
6000 (237) |
| Y Axis |
mm(") |
3300 (130) |
| Z Axis |
mm(") |
1000 (39.3) |
| Spindle nose to table surface |
mm(") |
1250 (49.2) |
| Distance between the Column |
mm(") |
3500 (137) |
| Spindle |
Spindle Taper |
- |
BT/CAT/DIN 50 |
| Spindle Speed |
r.p.m. |
6000/Opt.8000, 10000 |
| Spindle Power |
kw |
22.5 (30)/ Opt.26 (35) |
| Spindle Chiller |
|
With 22# Oil circulated cooling |
| Accuracy |
Positioning |
mm(") |
±0.005 (0.0002)/ 300 (12) ±0.015 (0.0006)Full stroke |
| P:0.045 (0.0018) |
| Repeatability |
mm(") |
±0.005 (0.0002) |
| PS:0.035 (0.0014) |
| Feed Rate |
X,Y Rapid Feed |
M/min. |
8 |
| Z Rapid Feed |
M/min. |
12 |
| Cutting Feed Rate |
mm(") |
1 ~ 7 |
| A.T.C |
A.T.C |
|
40/ Opt.60 |
| Max.Tool Length |
mm(") |
127(5) With adjacent tool |
| mm(") |
215 (8.5) Without adjacent tool |
| Max. Tool Length |
mm(") |
215 (8.5) Without adjacent tool |
| Max. Tool Weight |
kg |
20(44) |
| Guide Way |
LM Guide Size(L×W)/P.C |
mm(") |
10550x 55/2,
10550x 45/2 |
11700x 55/2,
11700x 45/2 |
| Guide Way P.C |
set |
14/ 14 |
16/ 16 |
| Y/Z Axes Box Way width/Y/Z |
mm(") |
200 (7.8)/ 70 (2.7) |
| Lubrication Unit |
Lub. Tank(2 sets) |
L |
4/ 12 |
| Air Unit |
Air System Tank |
L |
1500 |
| Air System Pressure |
kg / cm² |
6 |
| Coolant Unit |
Coolant Tank |
L |
900 |
| Coolant Unit Motor |
HP |
2HP |
| Power |
Required Electric Power |
kw |
50 |
| Machine Size |
Installation Area (L x W x H) |
mm(") |
14000x 6500x 5700 |
15000x 6500x 5700 |
| Machine Weight
(net/gross) |
kg |
65000 / 72000
(143000/ 158400) |
73000 / 80000
(160600/ 176000) |
| Controller |
Controller Brand |
|
FANUC/MITSUBISHI/SELCA |
| Note: The manufacturer reserves the right to modify the design, specification, mechanisms, .etc. of the machine without notice, all the specifications shown above are just for reference |
Grinding Machine Series
